Those are the current Sourcen, with which also the openNAS-0.9d firmware was built.

After that unpack once setup_openNAS.sh implement, thus (stupid-proved) listings hardcodeten adapted weden. The same applies to be shifted if the sourcen into another listing.
In addition the firmware is shifted after /tftpboot. The listing should be thus available and recordable.

Then kanns already loosely gehn. A make - C brecis/compilescripts linuxall provides the firmware.

xxx

After I deleted those .depend file in the entsprrechenden listing kept running it.

Into romdisk/Makefile must be replaced mksquashfs by ../mksquashfs/mksquashfs, otherwise he does not find the Tool.

Which me when regarding that .depend file been noticeable actual why stand there many Includes of my host system in it, since nevertheless actually only which should be from the Buildsystem. Otherwise that becomes inconsistently.

xxx

With stddef.h you are right, there have I vergessan to patchen.
depends should actually again be provided. Attempt before make linuxall times with clean or distclean.

xxx

I receive the firmware thus as follows:

1. SOURCE package after /home/ <User>/openNAS-0.9d-toolchain unpack.
2. Into this listing change
3. Script setup_openNAS.sh implement
4. Delete 1.0.1/tools/rpcgen the files in uC-src/NFS utils .depend and .depend1
5. Replace into romdisk/Makefile all occurrences of mksquashfs by ../mksquashfs/mksquashfs
6. Put on the listing /tftpboot/ as roots <user>. Afterwards chown <user>: users /tftpboot/ <user> implement
7. make - C brecis/compilescripts linuxall implement
8. Davorsitzen and every time the root password is asked, this to enter
9. Check then in /tftpboot/ <user>. There a file would have to be named image.flash. Those can flashen one then into the NAS

Remark: All occurrences of <user> in the above text by the own user name replaced


I hope help someone sign
xxx
I receive the firmware thus as follows:

1. SOURCE package after /home/<User>/openNAS-0.9d-toolchain unpack.
2. Into this listing change
3. Script setup_openNAS.sh implement
4. Delete the files depend and depend1 in uC-src/nfs-utils-1.0.1/tools/rpcgen
5. Replace into romdisk/Makefile all occurrences of mksquashfs through../mksquashfs/mksquashfs
6. Put on the listing as roots more /tftpboot/<user >. Implement afterwards "chown < user>:users more /tftpboot/<user >"
7. "make C brecis/compilescripts linuxall" implement
8. Davorsitzen and every time the root password is asked, this to enter
9. Check then in more /tftpboot/<user >. There a file would have to be named image.flash. Those can flashen one then into the NAS

Remark: All occurrences of < user > in the above text by the own user name replaced

xxx
Note:

Step 5 replace through "in the system mksquashfs install (if yet do not happen)"

Reason: In the package the contained mksquashfs is defective (@zaphot: Thanks for the error tracing).

Additional step 5a: The file romdisk/etc.zaphot/magic delete.

Reason: Otherwise the listing bursts /etc - no more all fits clean and is cut off.

xxx